Long reports, such as Feasibility and Recommendation Reports, are most often the final step in a series of documents, often beginning with a Proposal and perhaps following a series of Progress Reports. The reports in this rather loosely defined category are variously called feasibility reports, recommendation reports, evaluation reports, assessment reports, etc. They all do roughly the same thing—provide a careful study of a situation or problem, and often recommend what should be done to improve the situation. There are some subtle differences among these types, and names for them can vary.

Feasibility Reports

A feasibility report studies a situation (for example, a problem or opportunity) and a plan for doing something about it, and then determines whether that plan is “feasible”—whether it is practical in terms of current technology, economics, time frame, social needs and preferences, and so on. The feasibility report answers the question “Should we implement Plan X?” by stating “yes,” “no,” or sometimes a “maybe” or “under certain conditions.” Not only does it indicate whether the idea is feasible, it also provides the data and the reasoning behind that determination; conversely, it might outline the reasons why the idea cannot or should not be implemented, or what obstacles must be overcome before the idea can become feasible. Typical questions addressed in these reports include

• Is it possible?  Can this be done within the allotted budget, time frame, legal and regulatory conditions, and technical capabilities?
• Is it financially viable?  Even if it falls within our budget, should we do it?  Will it have long term benefits that outweigh costs? Is there a less expensive or financially risky way to achieve the same result? How does it compare to the cost of doing nothing about this situation?
• Will it be accepted by the community?  Will people be in favor of this idea? Will anyone be opposed to it?  How much public support is necessary to make this successful? (What kind of stakeholder consultation might be necessary to determine this?)

Recommendation Reports

A recommendation reports starts from a stated need; it offers a selection of solution options, presents a detailed comparative analysis of the options, and then recommends one, some, or none. For example, a company might be looking at grammar-checking software and want a recommendation on which product is the best fit for them. As the report writer on this project, you could study the market for this type of application and recommend one particular product, 2-3 possible products (differing perhaps in their strengths and their weaknesses), or none (maybe none of them are appropriate for the client’s specific needs). The recommendation report answers the question “Which option should we choose, and why?” (or in some cases “Which are the best options?) by recommending Product B, or maybe both Products B and C, or none of the products. These recommendations might arise from questions such as

• What should we do about Problem X?
• What is the best way to provide Function or Service A?
• Should we use Technology X or Technology Y to perform Function Z?

Evaluation Reports

An evaluation report provides a judgment or assessment rather than a yes-no-maybe answer or a recommendation. It provides a studied opinion on the value or worth of something. For example, for over a year the city of Austin had free bus transportation in an attempt to increase ridership and reduce automobile traffic. Did it work? Was it worthwhile?—These are questions an evaluation report would attempt to answer. This type of report compares a thing to a set of requirements (or criteria) and determines how well it meets those requirements. (And of course, this may result in a recommendation: to continue the project, scrap it, change it, or other possibilities.)

As you can see, these distinctions are rather fine, and they overlap somewhat. In real-world writing, these types often combine; you might see elements of the recommendation report combined with the feasibility report, for example.

Typical Contents of Recommendation and Feasibility Reports

Whatever variety of feasibility or recommendation report you write, whatever name people call it—most of the sections and the organization of those sections are roughly the same.

The structural principle fundamental to this type of report is this:  you provide not only your recommendation, choice, or judgment, but also the data, analysis, discussion, and the conclusions leading to it. That way, readers can check your findings, your logic, and your conclusions to make sure your methodology was sound and that they can agree with your recommendation. Your goal is to convince the reader to agree with you by using your careful research, detailed analysis, rhetorical style, and documentation. Since your reader will want to make an evidence-based decision, it is critical that all of your claims and recommendations are supported by sound research and evidence.

The general problem-solving approach for a Recommendation Report entails the steps shown in the example below.

These steps generally coincide with how you will organize your information.  Your report will be divided into several sections that will likely include most or all of the following elements:

1. INTRODUCTION:  the introduction should clearly indicate the document’s purpose. Your introduction will discuss the “unsatisfactory situation” that has given rise to this report, and the requirements that must be met (the Problem Definition). Your reader may also need some background. Finally, provide an overview of the contents of the report.
2. TECHNICAL BACKGROUND:  some recommendations or feasibility reports may require technical discussion in order to make the rest of the report meaningful. The dilemma with this kind of information is whether to put it in a section of its own or to fit it into the comparison sections where it is relevant. For example, a discussion of power and speed of tablet computers is going to necessitate some discussion of RAM, megahertz, and processors. Should you put that in a section that compares the tablets according to power and speed? Should you keep the comparison neat and clean, limited strictly to the comparison and the conclusion? Maybe all the technical background can be pitched in its own section—either toward the front of the report or in an appendix.
3. REQUIREMENTS AND CRITERIA:  a critical part of feasibility and recommendation reports is the discussion of the requirements (objectives and constraints) you’ll use to reach the final decision or recommendation. Here are some examples:
   • If you’re trying to recommend a tablet computer for use by employees, your requirements are likely to involve size, cost, hard-disk storage, display quality, durability, and battery function.
   • If you’re looking into the feasibility of providing every student at Austin Community College with an ID on the ACC computer network, you’d need define the basic requirements of such a program—what it would be expected to accomplish, problems that it would have to avoid, and so on.
   • If you’re evaluating the recent program of free bus transportation in Austin, you’d need to know what was expected of the program and then compare its actual results to those requirements.

Requirements can be defined in several ways:

Numerical Values:  many requirements are stated as maximum or minimum numerical values. For example, there may be a cost requirement—the tablet should cost no more than $900.

Yes/no Values:  some requirements are simply a yes-no question. Does the tablet come equipped with Bluetooth? Is the car equipped with voice recognition?

Ratings Values:  in some cases, key considerations cannot be handled either with numerical values or yes/no values. For example, your organization might want a tablet that has an ease-of-use rating of at least “good” by some nationally accepted ratings group. Or you may have to assign ratings yourself.

The requirements section should also discuss how important the individual requirements are in relation to each other. Picture the typical situation where no one option is best in all categories of comparison. One option is cheaper; another has more functions; one has better ease-of-use ratings; another is known to be more durable. Set up your requirements so that they dictate a “winner” from situation where there is no obvious winner. A “weighted objectives chart” or “Decision Matrix” is often used in these cases.

4. DISCUSSION OF SOLUTION OPTIONS:  In certain kinds of feasibility or recommendation reports, you’ll need to explain how you narrowed the field of choices down to the ones your report focuses on. Often, this follows right after the discussion of the requirements. Your basic requirements may well narrow the field down for you. But there may be other considerations that disqualify other options—explain these as well.

Additionally, you may need to provide brief technical descriptions of the options themselves. Don’t confuse this with the comparison that comes up in the next section. In this description section, you provide a general discussion of the options so that readers will know something about them. The discussion at this stage is not comparative. It’s just a general orientation to the options presented in an objective way. In the tablets example, you might want to give some brief, general specifications on each model about to be compared.

5. COMPARATIVE ANALYSIS: one of the most important parts of a feasibility or recommendation report is the comparison of the options. Remember that you include this section so that readers can follow the logic of your analysis and come up with different conclusions if they desire. This comparison can be structured using a “block” (whole-to-whole) approach, or an “alternating” (point-by-point) approach.

You might compare 3 solution options (1, 2, and 3) using three criteria for comparison (A, B, and C).  If you were comparing tablets, you’d likely use the point-by-point approach, having a section that compared all three options based on cost (criteria A), another section that compared them on battery function, and so on. You wouldn’t have a section that discussed everything about option 1, another that discussed everything about option 2, and so on. That would not be effective or efficient, because you still have to make direct comparisons somewhere near the end of your discussion (such as in a weighted objectives chart).

Each of these comparative sections should end with a conclusion that sums up the relative strengths and weaknesses of each option and indicates which option is the best choice in that particular category of comparison. Of course, it won’t always be easy to state a clear winner—you may have to qualify the conclusions in various ways, providing multiple conclusions for different conditions.

If you were writing an evaluation report, you wouldn’t be comparing options. Instead, you’d be comparing the thing being evaluated against the requirements placed upon it and the expectations people had of it. For example, Capital Metro had a program of more than a year of free bus transportation. What was expected of that program? Did the program meet those expectations?

6. SUMMARY TABLE: after the individual comparisons, include a summary table (such as a Weighted Objectives Chart explained below) that summarizes the conclusions from the comparative analysis section. Some readers are more likely to pay attention to details in a table than in paragraphs; however, you still have to write up a clear summary paragraph of your findings.

7. CONCLUSIONS:  the conclusions section of a feasibility or recommendation report amalgamates all of the conclusions you have already reached in each of the comparison sections. In this section, you restate the individual conclusions, for example, which model had the best price, which had the best battery function, and so on. You could give a summary of the relative strengths and weakness of each option based on how well they meet the criteria.

This section has to go further. It must untangle all the conflicting conclusions and somehow reach the final conclusion, which is the one that states which is the best choice. Thus, the conclusion section first lists the primary conclusions—the simple, single-category ones. Then it must state secondary conclusions—the ones that balance conflicting primary conclusions. For example, if one tablet is the least inexpensive but has poor battery function, but another is the most expensive but has good battery function, which do you choose and why? The secondary conclusion would state the answer to this dilemma.

8. RECOMMENDATIONS: the final section of feasibility and recommendation reports states the recommendations which flow directly from your conclusions and directly address the problem outlined in the introduction. These may sometimes be repetitive, but remember that some readers may skip right to the recommendation section. Also, there will be some cases where there may be the best choice, but you wouldn’t want to recommend it. Early in their history, laptop computers were heavy and unreliable—there may have been one model that was better than the rest, but even it was not worth having. You may want to recommend further research, a pilot project, or a re-design of one of the options discussed.

The recommendation section should outline what further work needs to be done, based solidly on the information presented previously in the report and responding directly to the needs outlined in the beginning. In some cases, you may need to recommend several ranked options based on different possibilities.

Weighted Objectives Charts

When comparing alternative solutions to see which one best meets the design criteria, you will often use a Weighted Objectives Chart (WOC) or a decision matrix of some kind. In order to evaluate the solution alternatives fairly and in an unbiased way, it is important to devise a way of evaluating the designs before they are created, or before you finalize those design alternatives. The criteria that go into a WOC should be based directly on the objectives you defined in your problem definition, and may include additional objectives that will help you measure the effectiveness and desirability of each solution alternative. Then, you build or choose the design alternatives to best fit these criteria.

Creating a weighted objectives chart entails several detailed steps:

1. Determine the objectives you will use to evaluate the design alternatives (base these on the objectives stated in your problem definition). Aim for at least five objectives to create a robust set of evaluation criteria
2. Place the objectives in order from most to least important
3. Assign each objective a weight, giving the most important objective the highest weight, and the least important objective receiving the lowest.  The combined weights of all objectives should sum to a unit (1, 10, or 100).
4. Create a scoring rubric for each objective, showing how you will assign a “grade” for how well each design meets that criteria. This is usually done using a Likert scale (scale of 1-5 or 1-10), with each value having a specific value or range of values. You will need to determine how you will measure and grade the achievement of each objective. These can be quantitative (miles per gallon of fuel consumption) or qualitative (subjective experience of comfort), as seen in the scoring rubric sample below.

Once you have determined your objectives, ranked and weighted them, and created scoring rubrics for each one, you can place them all in a table that allows you to easily compare each solution. See Table 7.5.1 for a sample Weighted Objectives Table designed to compare several car purchase options. In the magnitude column, you would enter the actual price, fuel consumption, etc. Under score, enter the score that the magnitude gets in the objective scoring rubric (seen above). To get the “value,” multiply your score by the weight. Adding all the values for each option will give you the overall utility value for each option, and show you which one best meets your objectives.

Note that the objectives are listed in order from highest to lowest weighted, and all the weights add up to 100. Therefore, if one possible purchase option had a sale price of $4299, you would enter that under the “magnitude;” that would receive a score of 2, based on the scoring rubric; multiply 2 by the weight of 30, and the overall score for that objective is 60.

You can download a fully formatted, blank WOC template in Word here:  Weighted Objectives Chart Template

Revision Checklist for Recommendation Reports

As you reread and revise your recommendation report, ensure that you have included all of the sections and elements described below.